91����Ƶ

San Antonio, Texas, Under administrative direction, is responsible for professional and supervisory work directing the activities of an Engineering section or division. Essential Job Functions Supervises engineering staff in the development, design, construction, and maintenance of principal public works projects. Provides information verbally and in writing to City Council and general public regarding any concerns. Reviews design plans, project specifications, and cost estimates; attends review meetings; identifies and solves design problems. Develops policies for section/division within the framework of applicable regulations. Develops programs to improve efficiency of division/section. Approves plans and specifications for construction contracts; recommends the letting of contract; ensures work is performed according to provisions of contract. Requests and evaluates consultant fee proposals; monitors and approves compensation for professional engineering services. Reviews bid packages prepared by consultants; attends pre-bid conferences; analyzes bid results; makes recommendations on accepting/rejecting bids. Develops and implements section/division budget. Provides legal testimony. Performs related duties and responsibilities. Bachelor's Degree in Engineering from an accredited college, university or engineering school approved by a State Board of Registration for Professional Engineers. Six (6) years' experience in engineering. No substitution for education allowed. Licensed to practice engineering in the State of Texas as a Professional Engineer. OR Licensed Professional Engineer (P.E.) from another state with the ability to obtain a P.E. license in the State of Texas within 6 months of employment. Valid Class 'C' Texas Driver's License. Must pass a Transportation Security Administration (TSA) Security Threat Assessment clearance upon employment. Must maintain federally mandated security clearance required to work at an airport at all times. Preferred Qualifications Civil Engineering Degree.  At least 10 years Construction/project management experience. ATt least 5 years construction management experience on an airport.  Extensive horizontal construction management experience a plus  Strong working knowledge of FAA policies and procedures as it relates to Airport planning, design, funding and construction; specifically experience and knowledge of FAA Airport design standards and criteria. Experience and knowledge of Airfield Safety procedures, policies and requirements.  Experience managing a team of at least three (3) people.

San Francisco, California, Position Summary Under general direction of the Director of Engineering Contracts, performs technical work related to preparation of contract documents, requests for proposals and formal bids, and administration of professional services agreements and construction contracts. May act as a liaison between District staff and professional consulting engineering firms or construction contractors. May serve as a contract administrative assistant to project engineers on design and construction projects. Maintains detailed and accurate records of contract compensation invoices, progress payments, status and schedules. Communicates with other District departments regarding engineering contracts. Performs related work as required. Applicants must apply online and submit the following documents at the time of application: 1. GGBHTD Online Employment Application   2. Resume (Scan and attach as PDF to your online application)  3. Applicants who do not possess the required bachelor's degree stated below should attach a written statement supporting qualifying experience (Scan and attach as PDF to your online application)    Application Review Dates: 1st Review Date:     October 25 , 2024 (Friday)   2nd Review Date:   November 8 , 2024 (Friday)         Essential Responsibilities   Assists in preparation of requests for proposals and formal bids, professional services agreements, and construction contract documents Assists with the preparation of contract amendments and contract change orders Performs invoice reviews and confirms invoices comply with contract requirements Reviews contractors' certified payrolls for compliance with contract requirements; performs labor and Small Business Enterprise / Disadvantaged Business Enterprise (SBE/DBE) compliance duties, such as, but not limited to, verifying certified payrolls with inspection daily diaries, performing contractor and sub-contractor employee interviews, verifying on-site postings of Federal and State required notices, keeping current records of Federal and State Wage Determination changes Assists with the review of extra work bills from contractors Assists with maintaining Engineering Department budgeting and accounting records Types correspondence, reports, forms and specialized documents related to the engineering contracts Researches information on the Internet and in the electronic and hard copy files for government rules, regulations and codes, historical information and certified documents Composes contract correspondence Assists with compiling Daily Diaries, matching them to their respective Extra Work Bills and entering the information onto a spreadsheet Prepares spreadsheets and reports for project status, summary of submitted invoices, requests for anticipated budget increases, etc. Establishes and maintains effective working relationships with District employees, customers, vendors and all others contacted during the course of work using principles of excellent customer service Performs additional related duties as assigned Regular and reliable performance and attendance is required   Minimum Qualifications Education and/or Experience:   A combination of college level training and position related experience equivalent to: A Bachelor of Science degree in Business Accounting or Construction Management. Additional public works contract administration experience may be substituted for education and training on a year-for-year basis Five years office contract and administration duties with an engineering or construction related company; experience in verifying invoices in varied forms; working experience in technical and legal document editing Five years of recent administrative experience requiring the use of initiative and independent judgment Demonstrated proficiency in using advanced word processing and basic spreadsheet functions   Physical Requirement:  Mobility to work in a typical office setting. Vision to read printed materials and a computer screen. Hearing and speech to communicate in person and over the telephone. Routine use of computer, telephone and other office equipment. Ability to travel to District facilities.   Required Knowledge, Skills and Abilities Working knowledge of: Engineering office and construction contract administration principles, practices, and terminology Office practices and procedures, including record keeping, report preparation, filing methods, and the operation of common office equipment Applicable federal, state and District laws, codes, regulations and policies related to public works contracts   Ability to: Maintain confidentiality and appropriately protect information and documents Work effectively as a team member Maintain records, compile reports and make accurate mathematical calculations Prepare and maintain detailed and accurate records and reports Establish and maintain effective working relationships with District and contractors' staff, consulting engineers Stay organized, to set priorities and to meet critical deadlines Use initiative and exercise sound judgment within established guidelines Rapidly learn the policies and procedures related to the work, including District standard conditions and special provisions for construction contracts Use personal/network computers and current software Follow the safety and health rules and safe working practices applicable to the job

Greenville, North Carolina, Special Instructions To Application: East Carolina University requires applicants to submit a candidate profile online to be considered for the position. Candidates must also submit a cover letter, a curriculum vitae/resume, and a list of three references, including contact information, online.  Please be aware that if selected as a candidate of choice, an automatic email will be sent to the individuals entered by the applicant in the References section of the People Admin applicant tracking system. Letters of reference submitted via the People Admin applicant tracking system will be verified and considered towards meeting this requirement. For letters of reference not submitted by People Admin tracking system, please have the original signed letters mailed directly to Turrochelle McEachern, ECU College of Engineering and Technology, Sci-Tech Bldg., Suite 100 MS# 507, Greenville, NC 27858. Applicants must be currently authorized to work in the United States on a full-time basis. Minimum Education/Experience: 2 years experience and a Bachelor's degree in a technology-related field. Qualifying degrees must be conferred from an appropriately accredited institution. Full time or Part time: Part Time Position Location (city): Greenville Organizational Unit Overview: The College of Engineering and Technology is comprised of the departments of Computer Science, Construction Management, Engineering, and Technology Systems. Faculty and staff in the College provide high-quality graduate and undergraduate degree opportunities and research and service programs that enable students to achieve their career goals and that promote a strong, sustainable future for our region. The Laboratory Supervisor reports to the faculty member who is assigned as the Instructor of Record.

Princeton, New Jersey, Supervisor, Infrastructure Maintenance and Construction US-NJ-Princeton Job ID: 2024-19026 Type: Full-Time # of Openings: 1 Category: Building Trades and Technicians Overview Reporting to the Manager, Infrastructure Maintenance and Construction and under the leadership of the Director of Civil and Environmental Engineering, the Supervisor, Infrastructure Maintenance and Construction leads, manages, plans, organizes, and administers a work unit which supports the universityâ™s civil infrastructure consisting of over 200 miles of underground utilities and four million square feet of roadways, walkways and plazas. Responsibilities include providing direct leadership and supervision to an in-house team comprised of hourly casual union labor from three local labor unions (Local 9, Local 172 and Local 825) that expands, and contracts as needed, typically ranging from 30 employees in the off season to more than 60 employees during peak activities. The work consists of both routine and emergency repairs, preventive maintenance, end of life replacement and new construction. The Supervisor fosters a culture that incorporates the core values of Facilities (teamwork, innovation, integrity, inclusiveness, respect, and sustainability) and places high value on customer service, workplace safety, and the use of technology to support the department and campus mission. The Supervisor also maintains strong communication and relationships with campus peers and partners, tailoring the operational resources and processes to meet and exceed customer expectations. The Supervisor provides daily on-site management of projects including ordering and tracking of materials/supplies, construction stakeout, time and absence management, implementation of health and safety plans, ensuring work is completed in accordance with the Universityâ™s design standards and design drawings, implementation of QA/QC for all work completed and all as built and closeout documentation is completed. In addition, the position is responsible for communication of all work through a series of meetings and notifications to ensure that the campus community is aware of the planned work in advance. This includes placing NJ One Call notifications, development of logistics plans, obtaining right-of-way permits, communication with facility managers and working with our facilities Project Communication Managerâ™s team to communicate the planned work to our Campus partners. During absences, or as necessary, the Supervisor may assume interim responsibilities of the Manager. Responsibilities Leadership and Management â“ provides direction, focus, guidance, motivation, support, prioritization, and oversight for assigned staff. Develops programs, processes, and procedures that result in a high-level of organizational performance and effectiveness; is responsive to directives from senior leadership and superiors; supports the unit, department, and institutional goals; and promotes a diverse and inclusive workplace. Provides for the professional training and development of employees. Ensures that workplace culture is inclusionary; enforces rules; holds subordinates accountable for effectiveness, efficiency, and personal conduct; conducts effective employment searches and provides hiring recommendations; participates in the administration of discipline as needed. Responsible for daily management of union staff, including labor and employee relations, all in accordance with departmental and University policy. Provide regular feedback and communication to assigned staff; keep Manager informed and be responsive to directives from leadership; support, and communicate departmental and University policies, goals, and objectives. Maintenance, Repair, and Construction Operations â“ responsible for implementation and management of an effective and efficient infrastructure maintenance repair program, including a preventive maintenance program. Develops, implements, and monitors administrative and technical control processes to ensure the reliable operation of underground utility and campus mobility infrastructure. Develops, implements, manages, and provides oversight to programs and work practices that ensure a high degree of quality of work performed by in-house staff and contractors, and results in a high degree of professionalism and customer satisfaction. Effectively provides management and oversight of contractors, including contract administration, hiring, work planning, execution, and turnover. Plans, organizes, schedules, leads, and oversees assigned staff to ensure high quality work with maximum efficiency and professionalism. Manages team activities, and coordinates with other trade shops, departments, campus customers, and others as necessary. Prioritizes work, establishes responsibilities, and assures excellent customer relations through both high-quality deliverables and professional interactions. Regularly monitors and inspects assigned projects and audits work task performance of assigned staff. Identifies, prioritizes, and estimates maintenance and repair work as well as customer requested work. Safety and Code Compliance â“ ensures that shop work practices are both current and safe, through effective training, monitoring and enforcement of best safety practices and safety work rules with vehicles, tools, equipment, and work tasks. Ensures compliance with University, Facilities, and Governmental safety requirements, including pertinent occupational health, safety and environmental codes and regulations. Responsible for ensuring all shop activities are compliant with applicable codes and other state and municipal regulations. Where necessary, provides documentation for building permits and/or safety inspections; completes all inspections and maintains documentation as required by codes and other laws. Budget and Schedule Management â“ develops initial cost estimates and manages budgets to ensure work is completed within the approved budget. Develops and manages the project planning schedule through completion of the project. With input from the Manager, customers, and the CMMS, develop short- and long-term work schedules that will meet both department maintenance and customer requirements, within established budgets. Determines the most effective and efficient methods to complete tasks, which may include the use of contract services. Assumes shop-level financial responsibility for material purchases, contracted services and proper accounting of employee labor and time. Provides accountability for all shop labor, supplies, equipment and materials used on work orders. For assigned contract efforts, ensures that all purchasing and contracting is in accordance with University policies and regulations, solicits quotes for purchased material and equipment, inspects and oversees contractor to assure full compliance with all University requirements. Enterprise Asset Management â“ ensures the effective utilization of the Facilities computerized maintenance management software (CMMS) system. Develops and implements work practices that result in a consistent, accurate, and timely cost tracking of work unit activities, materials, and purchased services. Develops and regularly review reports which detail performance of the assigned work unit. Provides summary and performance data and/or reports to senior departmental leadership. Utilizes the CMMS to manage shop work daily. Prepares, manages, and documents corrective and preventive maintenance work orders. Works with the assigned Scheduler/Planner to ensure that preventive maintenance work orders are created, scheduled and accomplished in a timely manner and updates are made in the preventive maintenance system. Perform other duties as assigned, including overtime assignments, special event support, and responding to after-hours campus emergencies. During emergencies, the Supervisor is classified as a Core Essential Employee. Qualifications Essential Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience â“ a minimum of five (5) years of verifiable experience in civil infrastructure construction or related field in positions of progressive responsibility, or an equivalent combination of education and experience. Management and Leadership â“ able to develop and communicate goals which are consistent with the departmental and university mission; motivate, plan, lead, organize the workforce to establish and maintain a work culture of excellence and inclusion in all facets of the operation; able to successfully handle multiple tasks at once, and be able to establish appropriate priorities, which are consistent with the best interests of the department and university. Specific Knowledge â“ strong technical knowledge of a wide range of underground utility systems. Utility systems that fall under the departmentâ™s responsibility include steam, condensate return, chilled water, hot water, geo-exchange, electrical, information technology infrastructure, water lines, sanitary sewers, and storm sewers. Technical Understanding and Competency â“ ability to effectively read, interpret, and understand technical documents, specifications, diagrams, sequences of operation, and drawings. Computer/Software Skills â“ possess strong skills and proficiency with personal computers and business application software, including use of AutoCad and Bluebeam. Communication and Analytical Skills â“ ability to communicate effectively, both verbally and in writing, to a diverse audience, and possess a knowledge of appropriate escalation protocols; possess highly developed analytical skills. Professional Attributes â“ organized, conceptual, analytical, strategic thinker, results-driven, interpersonal, self-starter, and innovative. Project Management â“ possess project management experience and have a good working knowledge with project planning, scheduling, and work implementation. Regulatory and Safety â“ possess solid knowledge of federal, state, and local safety and regulatory codes, with the ability to research applicable codes related to specific projects, departmental processes, or initiatives. After-Hour Emergency Response â“ must be able to respond to after normal business hour emergencies and incidents as needed, and on short notice. Essential Personnel â“ must be able to function in an essential personnel role, which may include an extended on-campus presence during campus, local, regional, or national emergencies. Driverâ™s License â“ must have a valid driverâ™s license. Preferred Qualifications: Bachelorâ™s degree in civil engineering, construction management, or a related field. Prior related experience in a higher education setting. Experience managing in a union environment. Princeton University is an Equal Opportunity/Affirmative Action Employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law. KNOW YOUR RIGHTS PI251100422

Princeton, New Jersey, Senior Construction Safety Coordinator US-NJ-Princeton Job ID: 2024-19625 Type: Full-Time # of Openings: 1 Category: Environment and Sustainability Overview The Princeton Plasma Physics Laboratory (PPPL) is a world-class fusion energy research laboratory managed by Princeton University for the U.S. Department of Energyâ™s Office of Science. PPPL is dedicated to developing the scientific and technological knowledge base for fusion energy. The Laboratory advances the fields of fusion energy and plasma physics research to develop the scientific understanding and key innovations needed to realize fusion as an energy source for the world. PPPL is operated by Princeton University for the US Department of Energy (DOE). We are seeking a results-driven Senior Construction Safety Coordinator to support the Environmental, Safety, & Health (ES&H) team for support and assurance on construction and major projects. This position serves as a key member of the ES&H, Construction & Project Safety Division team and will provide valuable assistance to construction of the new Princeton Plasma Innovation Center (PPIC), Critical Infrastructure Recovery & Renewal (CIRR), National Spherical Torus Experiment Upgrade (NSTX-U) Recovery, and other future campus infrastructure and experimental construction projects. The candidate must be able to proactively implement DOEâ™s Integrated Safety Management principles, promote safety as a PPPL core value, enable exemplary safety performance aligned with the Laboratory`s strategic and project plans. This role will promote project safety, integrate programs of best safety practices, standards, guidance, and procedures. This individual is expected to foster a proactive safety culture among PPPL and subcontractor team members that promotes a sense of urgency based on safety observations, assessments, and open feedback to mitigate risk and identify hazards. The Senior Construction Safety Coordinator will also support Lab-wide initiatives, responsible for assuring the implementation of the Labâ™s safety and security across the Lab while promoting PPPLâ™s values of diversity, equity, and inclusion. This position will also act as a strategic partner to support and assist project and construction line management in full implementation of ES&H programs. This is an exciting opportunity to join a dynamic, world-renowned research institution and further its work to strengthen our ES&H construction and project safety programs and expertise, develop innovative and efficient solutions to foster line management stewardship of ES&H, and promote a healthy work and safety culture for PPPL. Collaborate with members of the Construction & Project Safety Team for the proactive and effective implementation of Integrated Safety Management principles on construction and other projects in to maintain a safe and healthy environment for Laboratory employees, subcontractors, students, and visitors in support of PPPLâ™s scientific mission. Serve as a construction safety Subject Matter Expert in assisting the team with the following: Observe work in the field and document inspections to verify application of required controls identifying changed or changing conditions. Find practical, effective solutions for addressing workplace hazards and meeting PPPL requirements. Coach and mentor worker teams and workers on safe-work practices and requirements. Assist with coordination and scheduling of field safety staff and oversight activities. Assist in the review of project design plans, drawings and specifications and work planning submittals for compliance with safety standards and best practices. Serve as ES&H Project Representative for assigned projects throughout the lifecycle of the construction project. A proud U.S. Department of Energy National Laboratory managed by Princeton University, Princeton Plasma Physics Laboratory (PPPL) is a longstanding leader in the science and innovation behind the development of fusion energy â” a clean, safe, and virtually limitless energy source. With an eye on the future and in response to national priorities, PPPL also has begun a strategic shift from a singular focus on fusion energy to a multi-focus approach that includes microelectronics, quantum information science, and sustainability science. Whether it be through science, engineering, technology or professional services, every team member has an opportunity to make their mark on our world. PPPL aims to attract and support people with a rich variety of backgrounds, interests, experiences, and cultural viewpoints. We are committed to equity, diversity, inclusion and accessibility and believe that each member of our team contributes to our scientific mission in their own unique way. Come join us! Responsibilities Core Duties Assist managers, supervisors, and workers in fulfilling their roles and responsibilities for safely completing the projects in accordance with PPPL and regulatory requirements. Specific duties include: Observe work in the field for changed or changing conditions and verify effective application of controls using pause or stop work when needed. Assist with the preparation, review, and approval of Job Hazard Analysis (JHAs) and review project procedures and Construction, Environment, Safety and Health Plans for identification of hazards and appropriate controls. Conduct pre-shift work area walk-throughs to verify conditions are safe to proceed. Assist project staff and supervisors with pre-job/shift meetings to ensure workers are properly briefed as to the hazards and required controls. As SME, assist in finding effective, safe-work solutions to construction hazards and safety challenges. Proactively identify and communicate problems at their incipient stage and assist project team with their prompt and effective resolution. Pause or stop work, if needed. Review new or revised safety plans and procedures for the potential introduction of new hazards and safety challenges. Provide ES&H oversight of subcontract construction activities including design review, construction plan and submittal review, coordination of and support for field safety oversight of construction activities. Assist project teams and PPPL ES&H organization in reporting safety data and information. Partner with subcontractors to familiarize them with PPPLâ™s safety and industrial hygiene expectations and to provide guidance to steer their safety management of ongoing and upcoming activities in the proper directions. Perform onsite employee exposure monitoring for a variety of chemical contaminants and noise dosimetry associated with construction projects or facilities activities. Qualifications Education and Experience High School diploma is required. A minimum of 12 years direct experience serving as a safety professional in construction or power/utility industries, university, or Department of Energy research complex is required. A bachelorâ™s degree from an accredited college or equivalent in a related field is preferred with 7 years direct experience serving as a safety professional. Equivalent combination of education, training and experience is acceptable. Knowledge, Skills and Abilities Strong understanding of and experience with OSHA 1910 and 1926 requirements. In-depth experience with core physical and chemical hazards such as excavation, confined space, hazardous energy control, elevated work, rigging and material handling, noise, and respiratory hazards, etc. Experience with formal work planning and permitting systems is required. Strong written communication skills and the ability to effectively communicate with supervisors, co-workers, and front-line workers. Experience working with multi-trade workforces such as steelworkers, carpenters, mechanical technicians/laborers, electricians, plumbers, riggers, etc. General understanding of industrial hygiene sampling procedures and principles. Proficient in standard office computer applications and construction management software. Experience with reviewing project specifications, contract documents, design drawings, RFIs, submittals, and other relevant construction documents in preferred. Radiological experience, demolition, and construction background preferred. Certificates and Licenses OSHA 30-hour for Construction and Construction Health & Safety Technician (CHST) certification is required. Associate Safety Professional (ASP), Certified Safety Professional (CSP) and/or Certified Industrial Hygienist (CIH) certification is preferred. Physical Requirements Must be able to perform physically demanding work which includes bending, crawling, and lifting to 50 pounds without medical restrictions. Work may be performed near static magnetic fields. Must be capable of climbing ladders and working at heights from scaffolding, platforms, and powered aerial lifts without medical restrictions. Must be able to wear personal protective equipment to include respiratory protection without medical restrictions. Ability to stand for long periods of time and walk around the facility (approximately a few miles per day). Working Conditions This position is onsite. Regular hours (construction project dependent): 5 am till 2pm, or 6 am till 3 pm, or 7 am till 4 pm; Shift work and some weekends may be required. Princeton University is an Equal Opportunity/Affirmative Action Employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law. KNOW YOUR RIGHTS Please be aware that the Department of Energy (DOE) prohibits DOE employees and contractors from participation in certain foreign government talent recruitment programs. All PPPL employees are required to disclose any participation in a foreign government talent recruitment program and may be required to withdraw from such programs to remain employed under the DOE Contract. PI251100394

Frida Kahlo or Julia Alvarez Check your answer here.

ConsensusDocs are the only standard construction contracts endorsed by 91����Ƶ and written by a coalition of over 40 leading cons -- 

The 91����Ƶ Education and Research Foundation is now accepting applications for its annual undergraduate and graduate scholarship -- 

Shovels have hit the dirt on Gary/Chicago International Airport's $26 million-plus effort to improve air cargo infrastructure -- 

Renewed interest in expanding Amtrak's passenger service south of the border has set the stage for a proposed rail line to li -- 

Pipeline construction costs declined from $10.7 million per mile in 2023 to $7.8 million per mile this year thanks to lower l -- 

Seacoast Marine Construction has secured a $40 million contract from the US Army Corps of Engineers for restoration work on B -- 

Nine US contractors have been shortlisted for the 2024 World Demolition Awards, with projects ranging from controlled explosi -- 

With a $242 million federal grant secured, North Carolina's Department of Transportation is seeking public input on three des -- 

Parsons Transportation Group will lead engineering and design of the Interstate 55 bridge replacement, a critical infrastruct -- 

Cleanup continues in the the Southeast following Hurricane Helene, with extensive repairs to bridges and roads alongside effo -- 

Port Tampa Bay emerged largely unscathed from Hurricane Milton, with minimal damage to its docks, paving the way for fuel imp -- 

Remote, The Concrete Masonry Products Board (CMPB) is seeking a Region 3 Technical Director to lead regional efforts to engage, educate, and support the design and construction communities on the economical, safe, and sustainable use of concrete masonry systems. The ideal candidate for this position will be a collaborative leader, engaging presenter, and influential communicator.   Region 3 includes Ohio, Illinois, Minnesota, Michigan, Wisconsin, Indiana, Kentucky, Iowa, Nebraska, South Dakota, and North Dakota.   Who We Are The Concrete Masonry Products Board (CMPB) oversees the Concrete Masonry Checkoff program. The Checkoff program is a nationwide, industry-funded initiative that supports the advancement and growth of concrete masonry through education, research, and promotion. Checkoff is comprised of five distinct regions across the U.S. that operate under the CMPB. Each region is governed by a Regional Advisory Committee (RAC) that identifies local priorities and make recommendations to the CMPB.   CMPB strives to be a leading provider of design assistance and technical support in the field of concrete masonry. We work closely with architects, engineers, contractors, and other stakeholders to promote the use of concrete masonry in construction projects across the nation. Our mission is to drive innovation, sustainability, and excellence in concrete masonry design and construction. The Regional 3 Technical Director will be one of five regional directors that will report up to the National Design Director. Each Regional Director will play a pivotal role in making the Design Center a reality by providing technical expertise, educational resources, and design solutions to support the use of concrete masonry in diverse construction projects.   Key Responsibilities Design Assistance Coordination: Process and filter technical inquiries from the design community. Partner with local associations and contacts to provide timely assistance at an appropriate level. Business Development: Identify project opportunities in the early phases of design. Coordinate with regional partners to deliver concept proposals, cost and timing schedules, structural analysis, code compliance, and/or specification review as directed by regional advisory committees. Strategic Leadership: Lead regional and/or state strategy sessions to align promotional efforts with regional objectives. Develop and implement region-specific strategies to promote the use of concrete masonry. Communication and Outreach: Create and distribute email blasts, social media posts, and newsletters to promote concrete masonry. Lead Management: Generate and manage contact and project leads through effective networking and outreach efforts. Educational and Promotional Coordination: Coordinate and deliver presentations and seminars to educate architects and engineers about concrete masonry design, benefits, and applications. Organize and manage demonstrations and tours to showcase concrete masonry projects and innovations. Association and Trade Show Involvement: Actively participate in relevant industry associations to promote concrete masonry products and initiatives. Represent the organization at trade shows, ensuring a strong and professional presence. Technical Expertise: Stay abreast of industry trends, codes, standards, and best practices related to concrete masonry design and construction. Provide technical guidance and support to internal teams and external clients. Industry Collaboration: Foster collaborative relationships with industry associations, producers, contractors, and other organizations to maximize collective exposure of concrete masonry and avoid duplicative efforts.   Qualifications Bachelor's degree in architecture, engineering, construction management, or a related field. Proven experience (5+ years) in concrete masonry, construction, or related AEC profession. Self-motivated and driven professional who can influence others. A team player with strong presentation and communication skills with the capability to serve as the face of the organization. Strong interpersonal skills and the ability to build and maintain relationships with industry stakeholders. In-depth knowledge of concrete masonry materials, design principles, codes, and standards. Proactive and self-motivated with a strong sense of initiative. Strategic thinker with a track record of developing and executing successful business strategies. Ability to travel regionally as needed. Expected travel for this position is up to 50%.   Compensation and Other Information Salary includes a base compensation of $120,000 - $150,000 (USD) per year commensurate with and negotiable based on qualifications. Regional cost-of-living adjustments may also be considered. Full benefits, 401k match, and annual bonus plan. Applicant’s geographic location can be anywhere within the defined region, with a preference for a major metropolitan area or near a major airport hub. Expected start date: December 1st, 2024 References will be required for finalists.   To apply for this position, please fill out the application form by Friday, November 1: https://app.smartsheet.com/b/form/f311c5e10512469781f4028f44643e09

Portland, Oregon, Kennedy Jenks is seeking an experienced Construction Manager to join our expanding team in the Portland area. As the Construction Manager you will play a pivotal role in overseeing and managing major water and wastewater infrastructure projects. The Construction Manager is responsible for ensuring compliance with plans and specifications as well as company standards and established deadlines. Key Responsibilities:  Act as the day-to-day team leader for the project. Foster daily interactions with clients, designers, owners, contractors, inspectors, and relevant authorities. Conduct regular meetings with field office staff to address and resolve project-related matters. Facilitate the fair yet firm resolution of all project issues. Ensure the project aligns with approved plans, specifications, budget, and schedule. Coordinate and oversee sub-consultants. Observe, monitor, and meticulously document contractor work, including managing project correspondence, RFIs, Memos to Designer, Field Directives, Clarification Letters, submittals, change orders, schedule of values, and progress payments. Develop and distribute timely meeting agendas and minutes. Generate comprehensive project reports. Take responsibility for safety monitoring and mentoring of team members. Maintain a current copy of the agreement with the client and all change orders. Oversee accounting project management tasks, including the review and approval of employee timesheets, project status reports, monthly billing draft statements, aging reports, and more. Cultivate a strong relationship with the client, including regular communication regarding construction and contract-related matters. Prepare and distribute owner-required project reports. Attend and, when necessary, represent the owner at public meetings. Actively engage in mentoring and facilitating the growth of employees by reviewing their work-product for quality assurance. Demonstrate excellent communication skills, both verbally and in written documentation, to ensure accuracy, relevance, and attention to detail. Manage all on-site staff, including field inspection staff and field office staff assigned to the project. Coordinate staffing needs and staff availability with the CM group. Encourage staff growth and training through participation in KJ’s training opportunities and external training resources such as seminars and online coursework.   Qualifications:  5+ years of relevant experience managing all aspects of construction projects, from concept to close out, in water, wastewater and stormwater industry.   Degree in engineering, construction management, architecture, or related field. Experience may be substituted.   Professional engineering (PE) or architectural license is desirable Certifications such as CCM or PMP is desirable Proficiency with project management software Valid driver’s license and acceptable driving record Familiarity with materials, means, methods, tools, and contractual obligations involved in the construction or repair of various physical assets including water and wastewater and process equipment installations. Knowledge of building codes, technical requirements of construction and current project delivery methodologies. Excellent verbal, written and interpersonal communication skills with the ability to timely communicate to various project parties including designer, owner, contractor, and authorities having jurisdiction. This role requires that you are onsite full time Monday-Friday 8am-5pm. Must be able to work in a construction environment with limited amenities.  Salary range  for this position is anticipated to be $120,000 to $180,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. Benefits summary:  Medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs.  Sign on bonus, annual bonus, employee ownership options